pcb relay g2rl 221 pcb relay g2rl a power relay with various models ? high-sensitivity (250 mw) and high-capacity (16 a) versions. ? designed for cooking and hvac controls: blower motor, damper, active air purification, duct flow boost fans, etc. ? conforms to vde (en61810-1). ul recognized/ csa certiified ? meets en60335-1 requirements for household products. ? clearance and creepage distance: 10 mm/10 mm. ? tracking resistance: cti>250 ? coil insulation system: class f. ? rohs compliant ordering information model number legend 1. number of poles 1: 1 pole 2: 2 poles 2. contact form none: @ pdt a: @ pst-no 3. enclosure ratings none: flux protection 4: fully sealed 4. classification none: general purpose e: high capacity (1 pole) h: high sensitivity (1 pole) specifications coils ratings for general-purpose and high-capacity models note: the rated current and coil resistance are measured at a coil temperature of 23 c with a tolerance of 10%. classification enclosure ratings contact form spst-no spdt dpst-no dpdt general-purpose flux protection g2rl-1a g2rl-1 g2rl-2a g2rl-2 fully sealed g2rl-1a4 g2rl-14 g2rl-2a4 g2rl-24 high-capacity flux protection g2rl-1a-e g2rl-1-e --- --- fully sealed g2rl-1a4-e g2rl-14-e --- --- high-sensitivity flux protection G2RL-1A-H g2rl-1-h --- --- rated coil v oltage note: w hen ordering, add the rated coil v oltage to the model n u m b er. example: g2rl-1a dc12 g 2rl- @@@ - @ 1 23 4 rated voltage 5 vdc 12 vdc 24 vdc 48 vdc rated current 80.0 ma 33.3 ma 16.7 ma 8.96 ma coil resistance 62.5 360 1,440 5,358 must operate voltage 70% max. of the rated voltage must release voltage 10% min. of the rated voltage max. voltage 180% of rated voltage (at 23 c) power consumption approx. 400 mw approx. 430 mw
222 pcb relay g2rl coils ratings for high-sensitivity models note: the rated current and coil resistance ar e measured at a coil temperature of 23 c with a tolerance of 10%. contact ratings note: contact your omron representative fo r the ratings on fully sealed models. characteristics note: values in the above table are the initial values. rated voltage 5 vdc 12 vdc 24 vdc rated current 50.0 ma 20.8 ma 10.42 ma coil resistance 100 576 2,304 must operate voltage 75% max. of the rated voltage must release voltage 10% min. of the rated voltage max. voltage 180% of rated voltage (at 23 c) power consumption approx. 250 mw item general-purpose models high-capacity models high-sensitivity models number of poles 1 pole 2 poles 1 pole 1 pole contact material ag alloy (cd free) load resistive load (cos =1) rated load 12 a at 250 vac 12 a at 24 vdc (see note.) 8 a at 250 vac 8 a at 30 vdc (see note.) 16 a at 250 vac 16 a at 24 vdc (see note.) 10 a at 250 vac 10 a at 24 vdc (see note.) rated carry current 12 a (see note.) 8 a (70 c)/5 a (85 c) (see note.) 16 a (see note.) 10 a (see note.) max. switching voltage 440 vac, 300 vdc max. switching current 12 a 8 a 16 a 10 a max. switching power 3,000 va (4,000 va) 2,000 va 4,000 va 2,500 va item general-purpose (high-capacity) models general-purpose models high-sensitivity models number of poles 1 pole 2 pole 1 pole contact resistance 100 m max. operate (set) time 15 ms max. release (reset) time 5 ms max. max. operating frequency mechanical:18,000 operation/hr electrical:1,800 operation/hr at rated load insulation resistance 1,000 m min. (at 500 vdc) dielectric strength 5,000 vac, 1 min between coil and contacts 1,000 vac, 1 min between contacts of same polarity 5,000 vac, 1 min between coil and contacts 2,500 vac, 1 min between contacts of different polarity 1,000 vac, 1 min between contacts of same polarity 5,000 vac, 1 min between coil and contacts 1,000 vac, 1 min between contacts of same polarity impulse withstand voltage 10 kv (1.2 50 s) between coil and contact vibration resistance destruction:10 to 55 to 10 hz, 0.75 mm single amplitude (1.5 mm double amplitude) malfunction:10 to 55 to 10 hz, 0.75 mm single amplitude (1.5 mm double amplitude) shock resistance destruction:1,000 m/s 2 (approx. 100 g) malfunction:100 m/s 2 (approx. 10 g) endurance (mechanical) 20,000,000 operations (at 18,000 operations/hr) ambient temperature operating:?40 c to 85 c (with no icing) storage:?40 c to 85 c (with no icing) ambient humidity 5% to 85% weight approx. 12 g
pcb relay g2rl 223 approved standards ul recognized (file no. e41 643) / csa certified (file no. lr31928) - - ambient temp. = 40 c note: consult omron for additional ul / csa ratings vde (en61810-1) (license no. 119650) note: to achieve approved life cycles on sealed models, the relay should be vented by removing the ?knock off vent nib? on top of rel ay case after the soldering/washing process. electrical life data note: 1. the results shown reflect values measured using very severe test conditions i.e., duty: 1 s on/1 s off. 2. in order to obtain the full rated life cycles on the fully sealed models, the rela y should be properly vented by removing the ? knock off vent nib? on top of the relay case a fter the soldering/washing process. 3. electrical endurance will vary depending on the test conditions. contact your omron repr esentative if you require more detailed information for the electrical endurance under your test conditions. model contact form coil ratings contact ratings g2rl-1a spst-no 3 to 48 vdc 12 a at 250 vac (general use) g2rl-1 spdt 12 a at 24 vdc (resistive) g2rl-1a-e spst-no 3 to 48 vdc 16 a at 250 vac (general use) g2rl-1-e spdt 16 a at 24 vdc (resistive) G2RL-1A-H spst-no 5 to 24 vdc 10 a at 250 vac (general use) 10 a at 24 vdc (resistive) g2rl-1-h spdt g2rl-2a dpst-no 3 to 48 vdc 8 a at 277 vac (general use) 8 a at 30 vdc (resistive) g2rl-2 dpdt model contact form coil ratings contact ratings g2rl-1(a) 1 pole 5, 12, 18, 22, 24, 48 vdc 12 a at 250 vac (cos =1) 12 a at 24 vdc (l/r=0 ms) ac15: 3 a at 240 vac dc13: 2.5 a at 24 vdc, 50 ms g2rl-1(a)-e 1 pole 5, 12, 18, 22, 24, 48 vdc 16 a at 250 vac (cos =1) 16 a at 24 vdc (l/r=0 ms) ac15: 3 a at 240 vac (no) 1.5 a at 240 vac (nc) dc13: 2.5 a at 24 vdc (no), 50 ms g2rl-1(a)-h 1 pole 5, 9, 12, 24 vdc 10 a at 250 vac (cos =1) 10 a at 24 vdc (l/r=0 ms) g2rl-2(a) 2 poles 5, 12, 18, 22, 24, 48 vdc 8 a at 250 vac (cos =1) 8 a at 24 vdc (l/r=0 ms) ac15: 1.5 a at 240 vac dc13: 2 a at 30 vdc, 50 ms g2rl-1-e 16 a at 250 vac (cos =1) 30,000 operations min. 16 a at 24 vdc 30,000 operations min. 8 a at 250 vac (cos =0.4) 200,000 operation min. (normally open side operation) 8 a at 30 vdc (l/r=7 ms) 10,000 operation min. (normally open side operation) g2rl-1 12 a at 250 vac (cos =1) 50,000 operations min. 12 a at 24 vdc 30,000 operations min. 5 a at 250 vac (cos =0.4) 150,000 operation min. (normally open side operation) 5 a at 30 vdc (l/r=7 ms) 20,000 operation min. (normally open side operation) g2rl-1-h 10 a at 250 vac (cos =1) 100,000 operations min. 10 a at 24 vdc 50,000 operations min. g2rl-2 8 a at 250 vac (cos =1) 30,000 operations min. 8 a at 30 vdc 30,000 operations min.
224 pcb relay g2rl engineering data note: contact your omron representative for the data on fully sealed models. am b ient temperat u re ( c) g2rl-1a, g2rl-1 g2rl-1a-e, g2rl-1-e m u st operate/m u st release v oltage (percentage of rated v oltage) ( % ) note: the maxim u m coil v oltage refers to the maxim u m v al u e in a v arying range of operating po w er v oltage, not a contin u o u s v oltage. s w itching v oltage ( v ) s w itching c u rrent (a) 50 10 5 1 0.5 0.1 0 5 10 20 30 50 100 500 1,000 ac resisti v e load dc resisti v e load s w itching v oltage ( v ) s w itching c u rrent (a) 50 10 5 1 0.5 0.1 0 5 10 20 30 50 100 500 1,000 ac resisti v e load dc resisti v e load s w itching v oltage ( v ) s w itching c u rrent (a) 50 10 5 1 0.5 0.1 0 5 10 20 30 50 100 500 1,000 ac resisti v e load dc resisti v e load 250 200 150 100 50 0 10 20 30 40 50 60 70 8 0 90 100 1 8 0 130 8 5 am b ient temperat u re ( c) maxim u m coil v oltage ( % ) 100 90 8 0 70 60 50 40 30 20 10 060 40 20 8 0 100 120 m u st operate v oltage m u st release v oltage max. min. max. min. sample: g2rl-14-e 24 v dc q u antity: 5 am b ient temperat u re ( c) g2rl-2a, g2rl-2 g2rl-1a-e, g2rl-1-e g2rl-1a, g2rl-1 rated carry c u rrent (a) G2RL-1A-H, g2rl-1-h ac resisti v e load dc resisti v e load s w itching c u rrent (a) s w itching v oltage ( v ) G2RL-1A-H, g2rl-1-h g2rl-2a, g2rl-2 ambient temperature vs rated carry current maximum switchin g capacity ambient temperature vs maximum coil volta g e ambient temperature vs must operate and must release volta g es z z' shock direction y y' xx' z' z y y' x' x 1,000 1,000 1,000 1,000 1,000 1,000 nc contact 150 no contact unit: m/s 2 z z' shock direction y y' xx' z' z y y' x' x 1,000 1,000 1,000 1,000 1,000 1,000 nc contact 130 no contact unit: m/s 2 g2rl-1 (a)-e sample: g2rl-14 dc12v number of relays: 5pcs conditions: shock is applied in x,y,z directions three times each with and without energizing the relays to check the number of malfunctions. requirement: none malfunction 100m/s 2 sample: g2rl-24 dc12v number of relays: 5pcs conditions: shock is applied in x,y,z directions three times each with and without energizing the relays to check the number of malfunctions. requirement: none malfunction 100m/s 2 g2rl-2 (a) shock malfunction
pcb relay g2rl 225 dimensions note: all units are in millimeter s unless otherwise indicated. four, 1.3 0.1 dia. holes 3 4 5 1 (2.5) * indicates avera g e dimensions. terminal arran g ement/ internal connection (bottom view) mountin g holes (bottom view) 20 (2.3) 7.5 3.5 12.7 max. (12.5)* 0.8 0.5 0.5 0.5 29 max. (28.8)* 15.7 max. (15.5)* 3.5 g 2rl-1a(-h), g 2rl-1a4 five, 1.3 0.1 dia. holes g 2rl-1(-h), g 2rl-14 1 3 4 5 2 (2.5) terminal arran g ement/ internal connection (bottom view) mountin g holes (bottom view) 3.5 3.5 20 (2.3) 7.5 12.7 max. (12.5)* 0.8 0.5 0.5 0.5 0.5 3.5 29 max. (28.8)* 15.7 max. (15.5)* * indicates avera g e dimensions. 4 5 3 6 1 8 (2.5) terminal arran g ement/ internal connection (bottom view) mountin g holes (bottom view) 20 (2.3) 7.5 5 six, 1.3 0.1 dia. holes * indicates avera g e dimensions. 12.7 max. (12.5)* 0.8 0.5 0.5 0.5 29 max. (28.8)* 15.7 max. (15.5)* 3.5 g 2rl-1a-e, g 2rl-1a4-e ei g ht, 1.3 0.1 dia. holes g 2rl-1-e, g 2rl-14-e 1 8 2 7 3 6 4 5 (2.5) terminal arran g ement/ internal connection (bottom view) mountin g holes (bottom view) 20 (2.3) 7.5 5 5 * indicates avera g e dimensions. 12.7 max. (12.5)* 0.8 0.5 0.5 0.5 0.5 3.5 29 max. (28.8)* 15.7 max. (15.5)* six, 1.3 0.1 dia. holes g 2rl-2a, g 2rl-2a4 1 8 3 6 4 5 (2.5) terminal arran g ement/ internal connection (bottom view) mountin g holes (bottom view) 20 (2.3) 7.5 5 * indicates avera g e dimensions. 12.7 max. (12.5)* 0.8 0.5 0.5 0.5 29 max. (28.8)* 15.7 max. (15.5)* 3.5 ei g ht, 1.3 0.1 dia. holes g 2rl-2, g 2rl-24 1 8 2 7 3 6 4 5 (2.5) terminal arran g ement/ internal connection (bottom view) mountin g holes (bottom view) 20 (2.3) 7.5 55 * indicates avera g e dimensions. 12.7 max. (12.5)* 0.8 0.5 0.5 0.5 0.5 3.5 29 max. (28.8)* 15.7 max. (15.5)*
pcb relay g2rl omron on-line global - http://www.omron.com usa - http://www.components.omron.com cat. no. x301-e-1b printed in usa omron electronic components llc 55 e. commerce drive, suite b schaumburg, il 60173 847-882-2288 09/11 specificat ions subject to change without notice all sales are subject to omron electronic components llc standard terms and conditions of sale, which can be found at http://www.components.omron.com/compon ents/web/webfiles.ns f/sales_terms.html all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.0393 7. to convert grams into ounces, multiply by 0.03527.
|
